|
Wing bolt tool
While assembling my first plane with wing bolts I found that they dig into my fingers. If necessity is the mother of invention, laziness and alleviation of discomfort must surely be the father. I can't be the first person to think of this...
http://farm7.static.flickr.com/6052/...08d65aa6_z.jpg |
RE: Wing bolt tool
NO your not I have done the same thing.
|
RE: Wing bolt tool
Some wing bolts have dome shaped slotted heads for use with a standard screwdriver, while others have nut shaped heads for use with a socket tool, or have a centre hex shaped slot for use with an Allen key.
Karol |
RE: Wing bolt tool
The tool below is invaluable as it perfoms the solution to the problem you have already found and it also will assist you as you build more planes. [link]http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXK356&P=ML[/link] |
RE: Wing bolt tool
ORIGINAL: karolh Some wing bolts have dome shaped slotted heads for use with a standard screwdriver, while others have nut shaped heads for use with a socket tool, or have a centre hex shaped slot for use with an Allen key. Karol http://farm7.static.flickr.com/6042/...1f381a8baf.jpg The centre, light gray part is raised approximately 3/8" from the circular plate below. |
RE: Wing bolt tool
Nice homemade tool dude! Jon
|
RE: Wing bolt tool
ORIGINAL: grosbeak Then there's this type, which is what I have. The bolt from the top looks roughly like this: The centre, light gray part is raised approximately 3/8'' from the circular plate below. |
RE: Wing bolt tool
Thanks!
|
| All times are GMT -8. The time now is 07:42 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.