steering rod
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: Yucaipa, CA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
steering rod
[8D] Need help, I am replacing the threaded rod/rod ends that is connected to the servo saver. Apparently the rod I got was 20mm instead of 12mm. What I need is the measurement between the point of connection on the servo saver and the bell crank. This is on an E-Maxx. Can anyone help me? Do I need to cut down the threaded rod?
Thanks
Thanks