roto start for OS.18tm
02-11-2005, 07:10 PM
#2
Senior Member
My Feedback: (8)
Join Date: Apr 2002
Location: Harrison Twp,
MI
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
RE: roto start for OS.18tm
Here you go, I just ordered one myself;
http://www2.towerhobbies.com/cgi-bin...?&I=LXEVM9&P=0
http://www2.towerhobbies.com/cgi-bin...?&I=LXEVM9&P=0
02-13-2005, 04:42 AM
#3
Member
Join Date: Nov 2004
Location: San Jose, CA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
RE: roto start for OS.18tm
The above mentioned Rotostart is for the EZstart style OWB.
For a standard 12mm Hex OWB, I'd suggest using this one instead: http://www2.towerhobbies.com/cgi-bin...&I=LXERF2&P=ML
If you do get this one, you'll also need a 12mm Hex OWB: http://www2.towerhobbies.com/cgi-bin...&I=LXDLN7&P=ML
Be sure to place a spacer (about 6mm thick) between the OWB and the Rotostart cover to prevent the bearing from backing off the shaft, this is vital to prevent the OWB from binding and failing prematurely.
For a standard 12mm Hex OWB, I'd suggest using this one instead: http://www2.towerhobbies.com/cgi-bin...&I=LXERF2&P=ML
If you do get this one, you'll also need a 12mm Hex OWB: http://www2.towerhobbies.com/cgi-bin...&I=LXDLN7&P=ML
Be sure to place a spacer (about 6mm thick) between the OWB and the Rotostart cover to prevent the bearing from backing off the shaft, this is vital to prevent the OWB from binding and failing prematurely.
