SETTING UP A TWINSTAR WITH A FUTABA 9C AND HAVING TROUBLE WITH THE MIXING.
WITH CHANNEL 3 SET AS THE MASTER AND CHANNEL 6 AS THE SLAVE, I HAVE TRYED SETUPS IN THESE THREADS AND IN FUTABA'S FAQ, BUT I JUST CAN'T GET ENOUGH TRAVEL OUT OF THE CHANNEL 6 SERVO. I AM OBVIOUSLY DOING SOMETHING WRONG.

ANY HELP WOULD BE APPRECIATED.

THANKS

I have only bench tested but here is what I used.

ATV 3 100 100
ATV 6 100 100
PMIX-1
THR-> FLP (6)
-100 –100
LINK OFF
Trim ON
OFST 0
SW-E UP

Bill

Link on!! check Futaba FAQ's 9c for the setup!!