Indoor EDF Jets.
01-10-2024, 12:08 AM
#1
Thread Starter
Join Date: Nov 2010
Location: Coffs Harbour NSW, AUSTRALIA
Posts: 1,566
Likes: 0
Received 71 Likes
on
67 Posts
Indoor EDF Jets.
It was always on my mind to build a small EDF jet to fly indoors, while hoping for 10-20mm EDF set up, no luck to date, so I gave it a try with 30mm set up I have a great experience with over the years.
Well, the 1st. one came up better than expected so shortly after I built 2nd. one slightly larger and slower.
While waiting for reopening of my regular indoors venues I'm having a ball flying both of them outdoors at indoor conditions, all you have to do is get up early.
Got to start somewhere.
Delicate work as any of my indoor 3/D Pattern types.
Finished products.
Outdoor test runs.
Blue sky maiden.
Well, the 1st. one came up better than expected so shortly after I built 2nd. one slightly larger and slower.
While waiting for reopening of my regular indoors venues I'm having a ball flying both of them outdoors at indoor conditions, all you have to do is get up early.
Got to start somewhere.
Delicate work as any of my indoor 3/D Pattern types.
Finished products.
Outdoor test runs.
Blue sky maiden.
