Walkera Master CP Electrical Disaster
04-02-2013, 06:00 PM
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: , SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Walkera Master CP Electrical Disaster
Well my Master CP arrived from X-Heli last Friday and I had several nice hovers with the stock battery. I cut the Dean's pins from the Glacier 11.1v 1000Mah batteries today and replaced them with the 3.5mm connectors. Plugged in the first battery and heard a small "zip"... realized I had reversed the polarity on the connector. Genius... I know. 
And it was only on THAT battery. The other three are correct. My question is have I only fried the ESC or worse? Thanks
And it was only on THAT battery. The other three are correct. My question is have I only fried the ESC or worse? Thanks
04-13-2013, 02:03 PM
#3
Junior Member
Thread Starter
Join Date: May 2006
Location: , SC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Walkera Master CP Electrical Disaster
When I plugged in a correct battery there was no reaction. I bought a new ESC and replaced it a few days later and it works just fine.
