My fully modified Walkera 4G1B "Super Heli"
06-13-2009, 08:34 AM
#1
Member
Thread Starter
Join Date: Sep 2007
Location: Perth, Western Australia, AUSTRALIA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
My fully modified Walkera 4G1B "Super Heli"
Since purchasing this nice little heli, it become noticable there was not enough power. The stock 3.7v 1000mah powerpacks do not hold their power resulting in an under powered heli. I decided to boost the power source and blew the receiver in the process. So I done a complete rebuild of the electronics and went Spekrtum with full seperates electronics.
Mods and Upgrades
I have upgraded to:
* DX6i
* AR6100e
* HexTronic HXT900 servos on cyclic
* Walkera WDF4 main blades
Main
* HexTronic 3000KV
* Esky 25A ESC
* 4G1B stock 12t pinion
Tail
* Turnigy Eurodrive 3850KV - 4G1B stock 8t geared tail assembly, not direct drive
* Turnigy Plush 10A ESC - disable ESC's BEC
* Esky EK2-0704A Head Lock Gyro
Details and more pics here: http://tnim.bravehost.com/4G1B.html
View video here: http://www.rcuvideos.com/video/Walke...Super-Heli-wmv
Mods and Upgrades
I have upgraded to:
* DX6i
* AR6100e
* HexTronic HXT900 servos on cyclic
* Walkera WDF4 main blades
Main
* HexTronic 3000KV
* Esky 25A ESC
* 4G1B stock 12t pinion
Tail
* Turnigy Eurodrive 3850KV - 4G1B stock 8t geared tail assembly, not direct drive
* Turnigy Plush 10A ESC - disable ESC's BEC
* Esky EK2-0704A Head Lock Gyro
Details and more pics here: http://tnim.bravehost.com/4G1B.html
View video here: http://www.rcuvideos.com/video/Walke...Super-Heli-wmv
