December shipment will be on time m/l
#1
Thread Starter
Senior Member
Joined: May 2002
Posts: 6,189
Likes: 0
Received 2 Likes
on
2 Posts
From: Flower Mound (near Dallas),
TX
The December shipment of 28% planes will be here in December as I had hoped. The container should be delivered to us no later than Monday 12/27.
FYI The red/yellow/black Extra 300LX's are sold outm but all other 28% planes are still available.
Also, this shipment marks a divergence between the 300LX and the 300 Special. We've changed the wing on the Special to a new airfoil that is more "IMAC/pattern friendly". It's a bit thinner which moves the flight envelope up slightly. This benefits precision flyers with clean identifiable stalls, and snaps and spins that have virtually no over-rotation. 3D performance should not be adversely affected.
We've also made a few small changes to the other planes. We moved the elevator servos up and forward so it's easier to use long servo arms, added holes for sockets to accept the aileron servo extensions, little stuff like that. Still the same basic planes but a little easier to assemble.
TF
FYI The red/yellow/black Extra 300LX's are sold outm but all other 28% planes are still available.
Also, this shipment marks a divergence between the 300LX and the 300 Special. We've changed the wing on the Special to a new airfoil that is more "IMAC/pattern friendly". It's a bit thinner which moves the flight envelope up slightly. This benefits precision flyers with clean identifiable stalls, and snaps and spins that have virtually no over-rotation. 3D performance should not be adversely affected.
We've also made a few small changes to the other planes. We moved the elevator servos up and forward so it's easier to use long servo arms, added holes for sockets to accept the aileron servo extensions, little stuff like that. Still the same basic planes but a little easier to assemble.
TF



