Three Blade Prop for 1.40 DZ
03-11-2006 | 05:47 PM
#1
Thread Starter
My Feedback: (55)
Three Blade Prop for 1.40 DZ
Dave,
I have been wanting to use a three or four blade prop on my 2 meter pattern ship
and I'm not really seeing anything availabe that I think might work OK.
Mejzlik makes a 16x11 three blade carbon fibre prop for pattern and I was wondering
what you think. I am now using a 16.5x12 APC two blade prop on 30% DZ Powermaster
fuel. The airplane weighs 10lb 13oz.
tommy s
I have been wanting to use a three or four blade prop on my 2 meter pattern ship
and I'm not really seeing anything availabe that I think might work OK.
Mejzlik makes a 16x11 three blade carbon fibre prop for pattern and I was wondering
what you think. I am now using a 16.5x12 APC two blade prop on 30% DZ Powermaster
fuel. The airplane weighs 10lb 13oz.
tommy s
03-11-2006 | 07:39 PM
#2
Senior Member
RE: Three Blade Prop for 1.40 DZ
APC makes a 15.75x13 and a 15x13.5 both in 3 blade. Hobby Lobby sells a Graupner 16x8 in 3 blade. Not sure about the Mejzlik as i don't know anyone who has tried them. I'd try the APC 15x13.5 to start.
Good Flying!
Good Flying!
