hello,

the web site http://www.ysperformance.com/ except service ?
and on site http://www.yspartsandservice.com/ Does not exist any more the instruction for engine YS ??

thx

There are some changes that are being made and the new website doesn't have everything on it yet.


The previous YS Performance website is no longer in service.


http://www.yspartsandservice.com/

There will be more and more as the next few weeks unfold. One thing that is on the radar now is getting a set of instructions on running the YS engines. For now you can get the manuals for all the current engines.

These manuals include running instructions. The basic principles on running the engines and setting them up is the same on all the engines. There are differences like on the Dingo motors compared to the pressurized motors, but most of the adjustments and so on do the same things and work the same way. The big difference is the DZ style motors

Troy Newman
Team YS performance

Troy Newman

hello TROY !

for a new engine Ys63s,

1/ to open the High Speed NeedleValve of 3 turn ok ?
2/ to let turn during 10 second ok ?
3/ to start engine oke ?
4 / I must leave the engine in function like this during how much full ?
5/ for is the adjustment of the RPM 4000RPM it correct ?

thank you

Perhaps the attachments will be of help. Taken from the earlier website and if they are followed they will get and keep the engine running correctly.

Hi, here are the instructions if some one want to print them.

If you want something that looks better let me know so I can email it to you, here is a picture of it.

Si alguien necesita las instrucciones en Español las puedo traducir.

Suerte

hello Thank you for to print


I have some question for an engine ys63fz :

• I turn the LOW SPEED ADJUSTMENT 1 turn
• The engine accelerates all only after some second or ...
• stops after some second ?

to have a good slowed down which must I make ?

Thank you.