Important Please Read!!!
#1
Thread Starter
Senior Member
YS Engine Fans,
this forum has been a very successful way to help guys with their engines. The archives and past posts created by myself and Dave Shadel of your questions have helped get you back in the air. I am not an employee of YS Parts and Service. The commitments I have on my time have grown beyond what they were a couple years ago and I'm left with a difficult choice. I want to thank all of you for your patience and kind words over the last 18 months, however I will not be able to continue the technical support through this RC Universe forum.
The good folks at YS Parts and Service are going to pick up the slack created by me leaving this forum. You can contact Richard Verano and his crew at YS Parts and Service for technical support.
He has both email and telephone contact numbers available on his YS Parts and Service Website.
www.yspartsandservice.com
The best and easiest way to contact Richard is via telephone. They are available M-F, 9am to 5pm, Pacific Time
I am still associated with Richard and YS and want to thank them for the opportunity to help give back over the last couple of years via this forum.
Again thank you for allowing me to share my passion and knowledge about modeling with you.
Troy Newman
Team YS
this forum has been a very successful way to help guys with their engines. The archives and past posts created by myself and Dave Shadel of your questions have helped get you back in the air. I am not an employee of YS Parts and Service. The commitments I have on my time have grown beyond what they were a couple years ago and I'm left with a difficult choice. I want to thank all of you for your patience and kind words over the last 18 months, however I will not be able to continue the technical support through this RC Universe forum.
The good folks at YS Parts and Service are going to pick up the slack created by me leaving this forum. You can contact Richard Verano and his crew at YS Parts and Service for technical support.
He has both email and telephone contact numbers available on his YS Parts and Service Website.
www.yspartsandservice.com
The best and easiest way to contact Richard is via telephone. They are available M-F, 9am to 5pm, Pacific Time
I am still associated with Richard and YS and want to thank them for the opportunity to help give back over the last couple of years via this forum.
Again thank you for allowing me to share my passion and knowledge about modeling with you.
Troy Newman
Team YS
#4
Senior Member
My Feedback: (40)
Joined: Dec 2001
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
From: Merrimack,
NH
Troy, your knowledge and insight have been invaluable assets in this forum over the years. Many thanks for your contributions, best of luck in your endeavors.
#5

Troy thanks for all your help with my Ys's syndromes and for your kind nature and patience in dealing with all the queries. Top class knowledge .Best of luck.
#6
Senior Member
Joined: Dec 2006
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
From: Chula Vista,
CA
Troy, Thank you for all help, patience and understanding. Best of luck to you in everything you do. You are leaving us in very good hands with Richard. Thanks again
Ken
Ken
#13

My Feedback: (15)
Troy, I just want to say a very heartfelt THANK YOU for helping me and others here on RCU. You are a man with so much knowledge on the YS engines and I for one really have appreciated your guidance with all our questions and problems.
Best of luck to you and thank you again!!!! Hopefully this will give you some more flying time now
Take care and God bless.
John
Best of luck to you and thank you again!!!! Hopefully this will give you some more flying time now

Take care and God bless.
John
#15
Senior Member
Joined: Sep 2007
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
From: proserpineQueensland, AUSTRALIA
I too would like to thank you for your advice and insights into these great motors. you will be missed, and leave some awfully big shoes to fill
All the best for th future [sm=thumbs_up.gif][sm=wink_smile.gif]
All the best for th future [sm=thumbs_up.gif][sm=wink_smile.gif]





