Fuel Mixture: Does it Affect RPM Performance
10-18-2003 | 06:56 PM
#1
Thread Starter
Senior Member
My Feedback: (29)
Joined: Jan 2002
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
From: Amarillo,
TX
Fuel Mixture: Does it Affect RPM Performance
Hi Mike:
I have a ZDZ80 that I'm breaking in. I ran two gallons of 40:1 using the Penzoil petroleum based oil I ordered from RCS. I am now running 40:1 synthetic. I'm using some stuff called Silkolene that I picked up from my LHS.
When I was running the Penzoil I was getting good RPM's of 6600 +-. Now that I've gone to the 40:1 synthetic the best I'm getting is 6150.
So the question is will performance, RPM wise, get better when I go to 50:1 synthetic or does oil mixture have anything to do with RPM's ?
Or is it possible that I need to change my plug?
Thanks.
I have a ZDZ80 that I'm breaking in. I ran two gallons of 40:1 using the Penzoil petroleum based oil I ordered from RCS. I am now running 40:1 synthetic. I'm using some stuff called Silkolene that I picked up from my LHS.
When I was running the Penzoil I was getting good RPM's of 6600 +-. Now that I've gone to the 40:1 synthetic the best I'm getting is 6150.
So the question is will performance, RPM wise, get better when I go to 50:1 synthetic or does oil mixture have anything to do with RPM's ?
Or is it possible that I need to change my plug?
Thanks.
10-23-2003 | 03:40 PM
#2
Senior Member
Joined: Jul 2002
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
From: MD
RE: Fuel Mixture: Does it Affect RPM Performance
The Silkolene stuff does not sound good. Get off of it immediately. There should not be that dramatic of a change in performance......
