TMMY Scale Composites 35% scale Cessna
11-04-2008, 05:01 PM
#152
Senior Member
Join Date: Jan 2006
Location: sydney, AUSTRALIA
Posts: 1,246
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
hi steve no the pilot is not with the kit but we are looking into making them ,i will let you no either way,
cheers glen
cheers glen
ORIGINAL: Ozflyboi
Hi Guys,
So Glen does the pilot come with these kits?
I've been looking around everywhere for a scale pilot that will be suitable for this model. Not having much luck here in Aus.
That said I was considering using a Little Brittain Talking doll - Emily Howard. She might make a good pilot if she is the right size. Will just have to wire in her voice activation back to the transmitter via one of my spare channels
Steve
Hi Guys,
So Glen does the pilot come with these kits?
I've been looking around everywhere for a scale pilot that will be suitable for this model. Not having much luck here in Aus.
That said I was considering using a Little Brittain Talking doll - Emily Howard. She might make a good pilot if she is the right size. Will just have to wire in her voice activation back to the transmitter via one of my spare channels
Steve
11-05-2008, 06:50 AM
#153
Member
Join Date: Nov 2007
Location: Arvika, SWEDEN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello.
Wert good looking plains.
Glen. Wher did you gets this hings foor the flaps?
I like to hawe this on my Cessna.
Reg. Johnny.
Wert good looking plains.
Glen. Wher did you gets this hings foor the flaps?
I like to hawe this on my Cessna.
Reg. Johnny.
11-05-2008, 06:56 AM
#154
Join Date: May 2006
Location: Maryland,
MD
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hey, Johnny...
Glen, those hinges are not standard from Tommy? Hum... Please me and Johnny where you got them so we can install on ours...
Cheers
Mr DJ
Glen, those hinges are not standard from Tommy? Hum... Please me and Johnny where you got them so we can install on ours...
Cheers
Mr DJ
11-05-2008, 08:01 AM
#155
Senior Member
Join Date: Jan 2006
Location: sydney, AUSTRALIA
Posts: 1,246
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
hi dj you will get them as there a new add on ,,
this & a few other things,hents the price of this plane
cheers glen
hi johny hope all is well you can contact tommy about the new hinges
cg
this & a few other things,hents the price of this plane
cheers glen
hi johny hope all is well you can contact tommy about the new hinges
cg
11-05-2008, 08:08 AM
#156
Join Date: Jun 2008
Location: MelbourneVictoria, AUSTRALIA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hi Guys,
Those hinges look great!
For any of you guys who are interested my Biela 29x10 prop arrived today along with the Tru Turn 5 inch spinner to go with it.
Here is a couple of pics as this will go onto the DA150 my Cessna.
Steve[8D]
Those hinges look great!
For any of you guys who are interested my Biela 29x10 prop arrived today along with the Tru Turn 5 inch spinner to go with it.
Here is a couple of pics as this will go onto the DA150 my Cessna.
Steve[8D]
11-05-2008, 08:18 AM
#157
Join Date: May 2006
Location: Maryland,
MD
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Steve
Sweeeeeeet!!! I've got to get both of those props...
I never heard of Biela until Glen introduced it - must be from an overseas manufacture [&o]
Mr DJ
Sweeeeeeet!!! I've got to get both of those props...
I never heard of Biela until Glen introduced it - must be from an overseas manufacture [&o]
Mr DJ
11-05-2008, 08:23 AM
#158
Join Date: Jun 2008
Location: MelbourneVictoria, AUSTRALIA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
HI DJ,
Yes they are German made. I actually purchased mine direct from the manufacturer however this was a little pricey with conversion as I had to make two transactions as there was a little mix up. All good though as the propeller arrived in perfect new condition and the box was packed really well.
Now Austars carry these propellers which is great. I think it might even work out to be cheaper to buy from them instead.
These are the same that Johnny is using on his Cessna.
By the way like your color scheme in your pics above.
Hopefully my Cessna isn't too far off from completion now also.
Steve
Yes they are German made. I actually purchased mine direct from the manufacturer however this was a little pricey with conversion as I had to make two transactions as there was a little mix up. All good though as the propeller arrived in perfect new condition and the box was packed really well.
Now Austars carry these propellers which is great. I think it might even work out to be cheaper to buy from them instead.
These are the same that Johnny is using on his Cessna.
By the way like your color scheme in your pics above.
Hopefully my Cessna isn't too far off from completion now also.
Steve
11-05-2008, 08:57 AM
#159
Join Date: May 2006
Location: Maryland,
MD
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Thanks, Steve
I'll check with Glen and also do a search in the US...
I had my seats painted red to match the outer part of the plane...
I also had Tommy to paint a red stripe under the wings to help me know that it's not inverted.
I'm STILL waiting on Glen to give us a video... I may go with the DA 170 depending on how it flies...
I'm sure yours is right after mine...
Mr DJ
I'll check with Glen and also do a search in the US...
I had my seats painted red to match the outer part of the plane...
I also had Tommy to paint a red stripe under the wings to help me know that it's not inverted.
I'm STILL
waiting on Glen to give us a video... I may go with the DA 170 depending on how it flies...I'm sure yours is right after mine...
Mr DJ
11-05-2008, 09:14 AM
#161
Member
Join Date: Nov 2007
Location: Arvika, SWEDEN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello DJ.
You dont need to paint a stipe under the vings.
You see the plain in the air.
And you dont fly invertid whit this Cessna.
I well paint my props like you.
Reg. Johnny.
You dont need to paint a stipe under the vings.
You see the plain in the air.
And you dont fly invertid whit this Cessna.
I well paint my props like you.
Reg. Johnny.
11-05-2008, 02:44 PM
#165
Join Date: Jun 2008
Location: MelbourneVictoria, AUSTRALIA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hi Johhny,
I am fairly sure that the mains are 7inch and the nosewheel is 6 inch.
As quoted
- 1 each 15.2cm (6 inches) nose wheel
- 2 each 17.8cm (7 inch) main wheels
This information is available from Austars website as well as TMMY Manufacturing.
Steve
I am fairly sure that the mains are 7inch and the nosewheel is 6 inch.
As quoted
- 1 each 15.2cm (6 inches) nose wheel
- 2 each 17.8cm (7 inch) main wheels
This information is available from Austars website as well as TMMY Manufacturing.
Steve
11-05-2008, 04:03 PM
#166
Member
Join Date: Nov 2007
Location: Arvika, SWEDEN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello.
My hawe 6" on the nose end 5" on the main wheels.
I by new foor my Cessna.
I will also buy brakes foor my Cessna.
www.sierragiant.com
He will also create new wheels to me.
Reg. Johnny.
My hawe 6" on the nose end 5" on the main wheels.
I by new foor my Cessna.
I will also buy brakes foor my Cessna.
www.sierragiant.com
He will also create new wheels to me.
Reg. Johnny.
11-13-2008, 09:27 AM
#167
Member
Join Date: Nov 2007
Location: Arvika, SWEDEN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello DJ.
Did you get your Cessna?
Has spoken to Tommy and he starts next year to build a new plane to me.
Airbus 330-300.
377cm vingsp.
398cm lenght.
2 stk. turbin.
Reg. Johnny.
Did you get your Cessna?
Has spoken to Tommy and he starts next year to build a new plane to me.
Airbus 330-300.
377cm vingsp.
398cm lenght.
2 stk. turbin.
Reg. Johnny.
11-13-2008, 09:38 AM
#168
Join Date: May 2006
Location: Maryland,
MD
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: johnnyarvika
Hello DJ.
Did you get your Cessna?
Has spoken to Tommy and he starts next year to build a new plane to me.
Airbus 330-300.
377cm vingsp.
398cm lenght.
2 stk. turbin.
Reg. Johnny.
Hello DJ.
Did you get your Cessna?
Has spoken to Tommy and he starts next year to build a new plane to me.
Airbus 330-300.
377cm vingsp.
398cm lenght.
2 stk. turbin.
Reg. Johnny.
Got email from him yesterday - supposed to be packing plane by Friday... Now tell me more about this Airbus. Is it turbine as in jet engine? Show me a photo, I may want one also
Have you seen my new puppy? Check out pages 12 and 13: http://www.rcuniverse.com/forum/m_77...12/key_/tm.htm
Mr DJ
11-13-2008, 10:53 AM
#169
Member
Join Date: Nov 2007
Location: Arvika, SWEDEN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello DJ.
Wery nice plain.
I hawe a Falcon 120 nitroplain, I put a PST600R on it.
http://www.mes-avions-rc.net/video/2ndvideosamples.wmv
The Airbus.
2 stk. JetCat P80.
Reg. Johnny.
Wery nice plain.
I hawe a Falcon 120 nitroplain, I put a PST600R on it.
http://www.mes-avions-rc.net/video/2ndvideosamples.wmv
The Airbus.
2 stk. JetCat P80.
Reg. Johnny.
11-13-2008, 11:02 AM
#170
Join Date: May 2006
Location: Maryland,
MD
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Kool Beans, Johnny...
Got the PM also, excellent...
I'm jealous of you European flyers - no weight, thrust, or speed restrictions like us Americans.
Mr DJ
Got the PM also, excellent...
I'm jealous of you European flyers - no weight, thrust, or speed restrictions like us Americans.
Mr DJ
11-13-2008, 04:38 PM
#171
Senior Member
Join Date: Aug 2008
Location: London, UNITED KINGDOM
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
OH man that Airbus is why Kewl ... I want one
Edited : Just Showed the wife the Video link and she said the Airbus will be a 2009 Xmas Present if I am a good. OK .. Do you have a Web Address for the Airbus please?
Will go with Japanese Markings ... Maybe JAL or ANA ....
Sorry off the Cessna topic
Edited : Just Showed the wife the Video link and she said the Airbus will be a 2009 Xmas Present if I am a good. OK .. Do you have a Web Address for the Airbus please?
Will go with Japanese Markings ... Maybe JAL or ANA ....
Sorry off the Cessna topic
11-13-2008, 04:57 PM
#172
Member
Join Date: Nov 2007
Location: Arvika, SWEDEN
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello F-15.
In Germany you can by a Airliner.
http://rauch-airliner.com/
If you like to by a Airbus 380.
http://rauch-airliner.com/forsale.htm
If you dont like to bild it, Tommy in Thailand fiks it foo you.
Reg. Johnny.
In Germany you can by a Airliner.
http://rauch-airliner.com/
If you like to by a Airbus 380.
http://rauch-airliner.com/forsale.htm
If you dont like to bild it, Tommy in Thailand fiks it foo you.
Reg. Johnny.
11-13-2008, 06:12 PM
#173
Senior Member
Join Date: Aug 2008
Location: London, UNITED KINGDOM
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Building ARF is one thing but the Airbus A320 is different, I think I would need someone to build this for me ... and ship to Japan
11-13-2008, 07:30 PM
#174
Join Date: May 2006
Location: Maryland,
MD
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Not long now, and my baby will be in the mail. Check her out...notice the stripe on bottom side of the wing - I wanted that just in case it gets too far from me and I can't tell if it's inverted. Should have completed photos tomorrow... I will be going with eh DA 150 after all...
Hum, looks like the stripe is also on the top oh well, I guess it is now part of the entire paint scheme - yeah, yeah, that's it - that was my plan all along 
[X(]
Hum, looks like the stripe is also on the top
oh well, I guess it is now part of the entire paint scheme - yeah, yeah, that's it - that was my plan all along [X(]
11-13-2008, 09:34 PM
#175
Join Date: Jun 2008
Location: MelbourneVictoria, AUSTRALIA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hey DJ,
Looking good there!!!
Now I am getting excited to see some photos of mine.
I should have some soon.
Good choice the DA 150 I am sure she will have plenty of power to supply the Skylane.
The interior looks different but nice all the same.
Cheers,
Steve
Looking good there!!!
Now I am getting excited to see some photos of mine.
I should have some soon.
Good choice the DA 150 I am sure she will have plenty of power to supply the Skylane.
The interior looks different but nice all the same.
Cheers,
Steve