RE: Official Tamiya TT-01 Thread
right then car in US - 65
and in australian - 85 receiver in US - 21 and in Australian - 28 speed controller in US (new) - 38 and in australian - 48 motor comes free servo in US (new) - 7 and in australian - 10 controller in US - 25 and in Australian - 31 |
RE: Official Tamiya TT-01 Thread
and look here...
http://www.xe.net/ucc/ |
RE: Official Tamiya TT-01 Thread
. |
RE: Official Tamiya TT-01 Thread
Hey TT01 Racer, if you want ball bearings you can get them here http://www.stellamodels.net/catalog/...oducts_id=1315
For $10 :D Mike |
RE: Official Tamiya TT-01 Thread
yer but the difference is I'm selling the official tamiya ball races and you are selling a cheep brands that is no way as efficient as the tamiya ones
|
RE: Official Tamiya TT-01 Thread
The cheap stuff made in china these days is often better than the stuff from the US.
|
RE: Official Tamiya TT-01 Thread
hey thanxs for the offer but i already got bb's so i dont need more.
TT01 Racer |
RE: Official Tamiya TT-01 Thread
Hey you guys.
I have just ordered the aloy motor mount, and want to know if I still should use the "paper spacer" thats lokated between the motorn mount and the motor, or if the aloy one acts more like a heat sink? /tobias |
RE: Official Tamiya TT-01 Thread
yes I do it stops rattling an stop the screws coming loose
+ it means you get a special contact that stops scratches and helps heat loss |
RE: Official Tamiya TT-01 Thread
Yeah what he said, I use it.
|
RE: Official Tamiya TT-01 Thread
I still have a TT-01 sat here
please buy it I might send it on a last mission .....Put a rocket strapped to the back and see how fast it goes |
RE: Official Tamiya TT-01 Thread
ORIGINAL: hellwheels Hey you guys. I have just ordered the aloy motor mount, and want to know if I still should use the "paper spacer" thats lokated between the motorn mount and the motor, or if the aloy one acts more like a heat sink? /tobias |
RE: Official Tamiya TT-01 Thread
Ok, I will probebly keep it, even that my guts tells me to loose it to gain more heat sink "functionality".
|
RE: Official Tamiya TT-01 Thread
Hey i was wondering what is the Best motor i can get for around 50$ if its a bit over its ok i would like the motor to run with every thing stock
thanx for any suggestions TT01 Racer |
RE: Official Tamiya TT-01 Thread
if you have the stock speed controll you are linited to motors 23t or above
|
RE: Official Tamiya TT-01 Thread
ya i kinda new that but i was wondering about motor recomadations but ill probably just go to my lhs and talk to some guys there but thanx
TT01 Racer |
RE: Official Tamiya TT-01 Thread
Bull %^&$ you did not no that liar
|
RE: Official Tamiya TT-01 Thread
ORIGINAL: andrewtexas123 Bull %^&$ you did not no that liar |
RE: Official Tamiya TT-01 Thread
who are you the King of Siam
|
RE: Official Tamiya TT-01 Thread
ORIGINAL: foolberg who are you the King of Siam |
RE: Official Tamiya TT-01 Thread
what are you guys running for steering servos mine went on my cheap hbx and these two have the same frame so i was woundering if any one knew were to get a servo that i didnt have to modify any thing to put it in. thanks
|
RE: Official Tamiya TT-01 Thread
[:@] ...i just got done cutting my new body and started to prep it for paint, now i cant find the window masks!!! I cant believe i misplaced them[:@] also, does any have there tt-01 with a rear toe-in and front toe-out?
|
RE: Official Tamiya TT-01 Thread
O sorry he is my friend.
|
RE: Official Tamiya TT-01 Thread
I have a TT01R with a Photon Speed 20t motor. I recently put a 26t pinion and 55t spur gear in, so much more top speed from the 22/58, and the acceleration is still awesome. The engine doesnt over heat either which is a bonus ;) I think it's still a littler under geared, so I might go up to 27 or 28 pinion, maybe. I'll speed trap to see what speeds I'm getting, my guess is 40-50kph. What you guys think.
The car handles pretty good (needs some better tires for street use though), and it's great being able to adjust the setup for almost any given situation. |
RE: Official Tamiya TT-01 Thread
Im using a 27t and 19/16 and i get around 60kph.. I doubt a 20t with that gearing will only do 40-50.
|
All times are GMT -8. The time now is 11:11 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.