Jeti-duplex-ds-16-2.4-ghz
#1677
My Feedback: (6)
Hi Gary, Have you been successful with this? I tried it with the PB cable last night and couldn't get a connection to the receiver. Also tried downloading additional drivers but, still no luck. Is there a trick to it or should it be plug and play?
thanks
Mike
thanks
Mike
Last edited by luv2flyrc; 04-14-2015 at 04:09 AM.
#1678
Hi Mike, I have both types but tbh I've not had cause to try it but I know several guys have managed it successfully from other forums. They certainly look exactly the same,
Gary.
Gary.
#1679
Senior Member
Join Date: Jun 2013
Location: , FL
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Zb/Jeti USA
#1680
My Feedback: (6)
Hi Zb , just to clarify, my CB200 and R3 combo is working fine. The set up was pretty easy, I'm just trying to update the firmware to the most current.
I don't have the Jeti usb cable because it was out of stock. I do have a Powerbox USB cable which a few people have said will work as well but, doesn't seem to be working for me.
I'm going to give it another shot tonight and see if I can do the updates. I'll order the jeti cable from you as soon as you get them.
Thanks
Mike
I don't have the Jeti usb cable because it was out of stock. I do have a Powerbox USB cable which a few people have said will work as well but, doesn't seem to be working for me.
I'm going to give it another shot tonight and see if I can do the updates. I'll order the jeti cable from you as soon as you get them.
Thanks
Mike
#1682
My Feedback: (251)
HI all, what's good about not having it work from the start is that you learn about the TX so much quicker, you travel through all the setting to see what you did wrong, after 2 days of searching, I know the TX pritty good now and am embarranced. I thought number 1 servo was under the switch.
Rcpete
Rcpete
#1683
Join Date: Oct 2002
Location: Leeds, UNITED KINGDOM
Posts: 1,449
Likes: 0
Received 11 Likes
on
8 Posts
I have stock if you are really stuck for a USB lead. No idea how much it would cost to ship accross the pond but I can find out if you want.
www.jettstreamuk.co.uk
John
www.jettstreamuk.co.uk
John
#1684
My Feedback: (6)
I have stock if you are really stuck for a USB lead. No idea how much it would cost to ship accross the pond but I can find out if you want.
www.jettstreamuk.co.uk
John
www.jettstreamuk.co.uk
John
Mike
#1686
Join Date: Oct 2007
Location: Montreal, QC, CANADA
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
The USB cable is such an important part that Jeti should concider selling it as a possible add on option with the Tx when you order one. At least it would make people aware of the need to at least have one.
Too many guys have been stuck with the update problem
Too many guys have been stuck with the update problem
#1687
My Feedback: (44)
I know with the Cortex Gyro a USB cable is included with each one....
#1689
Senior Member
Join Date: Jun 2013
Location: , FL
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Look we found the way for full Power Redundancy and Cortex Stabilization for smaller jets if somebody does not want to use Central Box 200/400.
Zb/Jeti USA
www.espritmodel.com/emcotec-power-distribution-systems-s-bus.aspx
Zb/Jeti USA
www.espritmodel.com/emcotec-power-distribution-systems-s-bus.aspx
#1691
Join Date: Oct 2007
Location: Montreal, QC, CANADA
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Nice setup Rcpete. Do you fly thumb or pinched? Just wondering, I fly pinched and if you do I was questioning if your setup had advantages over the DC tray style radio.
#1693
Senior Member
Join Date: Jun 2013
Location: , FL
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
[h=1]Jeti Programming: Timers and Alarms[/h]
https://www.youtube.com/watch?v=-YG9ZeAiBH4
[h=1]Jeti Programming: How To Update Your Transmitter[/h]
https://www.youtube.com/watch?v=dzSCZT7Don4
https://www.youtube.com/watch?v=-YG9ZeAiBH4
[h=1]Jeti Programming: How To Update Your Transmitter[/h]
https://www.youtube.com/watch?v=dzSCZT7Don4
#1694
My Feedback: (251)
Rcpete
Also, anyone know when Behotec and Jet Central turbine sensers will come out, would be cool to do adjustments to the turbine from the transmitter.
Last edited by rcpete347; 04-19-2015 at 05:33 PM.
#1696
"Ok, I received the Jeti update cable and updating the receivers was quick and painless. Although the PB update cable "looks" the same, it wouldn't work for me."
Interesting Mike, I wonder if it works the other way round then?
Interesting Mike, I wonder if it works the other way round then?
#1699
My Feedback: (39)
Thomas
Last edited by bluelevel; 04-20-2015 at 01:30 PM.
#1700
we have run up to 36 inches in test..
Let me clearly say this though.. Use HIGH quality leads if you have long signal leads.. Not for the Load, but You want high signal quality and minimum voltage drop. Dont be surprised if you see 1/2 volt drop from the CB to the Rx.. set your alarms accordingly..
During your range check, look at your quality numbers as well.. it will tell you what you need to know.. then go back after the maidens and look at the data of signal quality and signal..
I have only had to reposition an antenna two times after a maiden.
Let me clearly say this though.. Use HIGH quality leads if you have long signal leads.. Not for the Load, but You want high signal quality and minimum voltage drop. Dont be surprised if you see 1/2 volt drop from the CB to the Rx.. set your alarms accordingly..
During your range check, look at your quality numbers as well.. it will tell you what you need to know.. then go back after the maidens and look at the data of signal quality and signal..
I have only had to reposition an antenna two times after a maiden.