Bavarian Demon Cortex PRO is here!!
#129
Senior Member
Join Date: Jun 2013
Location: , FL
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Captron showed us Jeti integration firmware at the FL Jets, they said in next 2 weeks we will have full integration using EX Bus and all telemetry will just pass thru.
Just note, you will need .bin file for the transmitter. Make sure you add it to the Devices folder.
Zb/Jeti USA
Just note, you will need .bin file for the transmitter. Make sure you add it to the Devices folder.
Zb/Jeti USA
#138
My Feedback: (3)
Yes, you can just copy all the files from the transmitter SD card via USB (and store them on your disk drive or another SD card)
Or you can just remove the SD card and copy it directly...
It's up to you.
Just remember to properly format all SD cards that you will be using as a backup.
#139
My Feedback: (53)
Yes, you can just copy all the files from the transmitter SD card via USB (and store them on your disk drive or another SD card)
Or you can just remove the SD card and copy it directly...
It's up to you.
Just remember to properly format all SD cards that you will be using as a backup.
Or you can just remove the SD card and copy it directly...
It's up to you.
Just remember to properly format all SD cards that you will be using as a backup.
#140
My Feedback: (34)
WOW this is all over my head LOL
I have 4 of the regular Cortex gyros in some of my jets/war birds.
So for the regular every day spectrum DX18 user the only advantage is the exstra gyro controlled channel, (so no more Y harness for gyro on rudder and nose wheel) is this correct?
You cant add Spectrum sats, and use this just as a reciver with all 14 channels mentioned right, like a power Box SRS?
Im trying to figure out what to put in my new Aviation Design Diamond. I have a Power Safe 12channel Spectrum receiver, and I was going to just get a regular cortex, but to be honest, the $400 of the power box SRS with the gyro built in for $400 is a really close in cost to 12 channel power safe receiver and cortex gyro.
Dose Cortex have any planes to add there gyro in a power box set up? Im not a fan of I gyros.
Thanks Mike
I have 4 of the regular Cortex gyros in some of my jets/war birds.
So for the regular every day spectrum DX18 user the only advantage is the exstra gyro controlled channel, (so no more Y harness for gyro on rudder and nose wheel) is this correct?
You cant add Spectrum sats, and use this just as a reciver with all 14 channels mentioned right, like a power Box SRS?
Im trying to figure out what to put in my new Aviation Design Diamond. I have a Power Safe 12channel Spectrum receiver, and I was going to just get a regular cortex, but to be honest, the $400 of the power box SRS with the gyro built in for $400 is a really close in cost to 12 channel power safe receiver and cortex gyro.
Dose Cortex have any planes to add there gyro in a power box set up? Im not a fan of I gyros.
Thanks Mike
#142
My Feedback: (34)
OK I just got mine in, I was really hoping for more of a manual.
So The only difference between this Pro and my regular 5 other Cortex gyros is the fact the Pro has one more gyro controlled output, (great for nose wheel) and dosnt jitter as much as the regular one? Am I missing any thing, I use Spectrum/DX18
So The only difference between this Pro and my regular 5 other Cortex gyros is the fact the Pro has one more gyro controlled output, (great for nose wheel) and dosnt jitter as much as the regular one? Am I missing any thing, I use Spectrum/DX18
#143
My Feedback: (11)
OK I just got mine in, I was really hoping for more of a manual.
So The only difference between this Pro and my regular 5 other Cortex gyros is the fact the Pro has one more gyro controlled output, (great for nose wheel) and dosnt jitter as much as the regular one? Am I missing any thing, I use Spectrum/DX18
So The only difference between this Pro and my regular 5 other Cortex gyros is the fact the Pro has one more gyro controlled output, (great for nose wheel) and dosnt jitter as much as the regular one? Am I missing any thing, I use Spectrum/DX18
#144
Join Date: Mar 2017
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Having trouble connecting my Cortex Pro to the computer software. Running ACP 1.02, downloaded from the correct link.
When starting the software, I get the flaming startup window which only tells me to connect a device. Plugging in the cortex pro (getting the typical sound for windows detecting new stuff). The cortex pro shows solid green for a couple seconds, the flashes red rapidly (during which windows plays the device detection sound), and after a few more seconds, the led flashes slow red, apparently indefinitely. The software does not seem to detect it what so ever.
Any tips?
(I have no servos, other power sources, or jumpers connected at all, just the gyro and the USB cable)
When starting the software, I get the flaming startup window which only tells me to connect a device. Plugging in the cortex pro (getting the typical sound for windows detecting new stuff). The cortex pro shows solid green for a couple seconds, the flashes red rapidly (during which windows plays the device detection sound), and after a few more seconds, the led flashes slow red, apparently indefinitely. The software does not seem to detect it what so ever.
Any tips?
(I have no servos, other power sources, or jumpers connected at all, just the gyro and the USB cable)
#146
My Feedback: (40)
Having trouble connecting my Cortex Pro to the computer software. Running ACP 1.02, downloaded from the correct link.
When starting the software, I get the flaming startup window which only tells me to connect a device. Plugging in the cortex pro (getting the typical sound for windows detecting new stuff). The cortex pro shows solid green for a couple seconds, the flashes red rapidly (during which windows plays the device detection sound), and after a few more seconds, the led flashes slow red, apparently indefinitely. The software does not seem to detect it what so ever.
Any tips?
(I have no servos, other power sources, or jumpers connected at all, just the gyro and the USB cable)
When starting the software, I get the flaming startup window which only tells me to connect a device. Plugging in the cortex pro (getting the typical sound for windows detecting new stuff). The cortex pro shows solid green for a couple seconds, the flashes red rapidly (during which windows plays the device detection sound), and after a few more seconds, the led flashes slow red, apparently indefinitely. The software does not seem to detect it what so ever.
Any tips?
(I have no servos, other power sources, or jumpers connected at all, just the gyro and the USB cable)
#147
Join Date: Mar 2017
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
#149
#150
I've not tried it but I see no reason it shouldn't work. UDI from Jeti RX into ports A/B of the Cortex Pro. Ports 5/6 from the Cortex Pro to the Power Box.