Pipe and Header Needed for a Webra 145AAR
#1
Thread Starter
My Feedback: (24)
Join Date: Jul 2005
Location: Chilton,
TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Pipe and Header Needed for a Webra 145AAR
I am using it in a Hydeout. I think I will need a 1 1/2 inch rise. Not sure of the length of the pipe though. Please help!!! Thanks.. John
#2
My Feedback: (1)
RE: Pipe and Header Needed for a Webra 145AAR
Hey RareBear,
I am using the Johnson header from Central with the Webra pipe from Horizon with my 145 on my Focus I. My header has the 2.25 inch rise (or drop, depending), I believe Johnson makes a 1.5 inch, also available from Central.
I have mine set for max length of the Focus pipe tunnel. Will measure it if you want.
Also, I have the Aero Slave pipe to use on my Webra 160/Johnson header for my Brio; Aero Slave suggests 30 inches overall for the 160. Could be different for the 145.
Since the original post, I have measured the length of the 145 system: straight line from glow plug to end of pipe body (not including stinger)--32 3/8 inches.
Jim
I am using the Johnson header from Central with the Webra pipe from Horizon with my 145 on my Focus I. My header has the 2.25 inch rise (or drop, depending), I believe Johnson makes a 1.5 inch, also available from Central.
I have mine set for max length of the Focus pipe tunnel. Will measure it if you want.
Also, I have the Aero Slave pipe to use on my Webra 160/Johnson header for my Brio; Aero Slave suggests 30 inches overall for the 160. Could be different for the 145.
Since the original post, I have measured the length of the 145 system: straight line from glow plug to end of pipe body (not including stinger)--32 3/8 inches.
Jim