Large scale Luftwaffe/Axis forum..
#852
Thats my CMPRO ZERO 120.
Its an old model with many-many flights , i had two serious crashes during past years , i rebuild it ( its about 9 kgr!!!! total weight, now) but it flies really nice (i made a pair of split flaps for slower landings though) and made her a "heavy" weathering as you can see.
Its an old model with many-many flights , i had two serious crashes during past years , i rebuild it ( its about 9 kgr!!!! total weight, now) but it flies really nice (i made a pair of split flaps for slower landings though) and made her a "heavy" weathering as you can see.
#854
My Feedback: (10)
Join Date: Sep 2004
Location: Displaced Canadian in Central Texas TX
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
I read somewhere that the extreme weathering that Japanese Planes developed were a combination of exsessive use as the Planes were pushed into continuous service; and that the Paint/Primer and Technique was poor and adherance was not great; poor quality of paint and technique
#855
Thats my CMPRO ZERO 120.
Its an old model with many-many flights , i had two serious crashes during past years , i rebuild it ( its about 9 kgr!!!! total weight, now) but it flies really nice (i made a pair of split flaps for slower landings though) and made her a "heavy" weathering as you can see.
Its an old model with many-many flights , i had two serious crashes during past years , i rebuild it ( its about 9 kgr!!!! total weight, now) but it flies really nice (i made a pair of split flaps for slower landings though) and made her a "heavy" weathering as you can see.
What engine have you got in your Zero?
#856
Thread Starter
My Feedback: (157)
Thats my CMPRO ZERO 120.
Its an old model with many-many flights , i had two serious crashes during past years , i rebuild it ( its about 9 kgr!!!! total weight, now) but it flies really nice (i made a pair of split flaps for slower landings though) and made her a "heavy" weathering as you can see.
Its an old model with many-many flights , i had two serious crashes during past years , i rebuild it ( its about 9 kgr!!!! total weight, now) but it flies really nice (i made a pair of split flaps for slower landings though) and made her a "heavy" weathering as you can see.
#857
Thanks a lot for your kind words!
i have dle 30cc on it, 19x8 3blade fiala prop, eurokit retracts and 3blade spinner from sds hobby.
i wish a had the bigger one (cmpro zero 50cc) or esm zero but i cant find them nowhere here in Europe so i will wait.....
i have dle 30cc on it, 19x8 3blade fiala prop, eurokit retracts and 3blade spinner from sds hobby.
i wish a had the bigger one (cmpro zero 50cc) or esm zero but i cant find them nowhere here in Europe so i will wait.....
#859
have CMPro 50cc Zero. She hasn´t flown yet, but the weight with DLE 55 is more than 12 kg! I think, she is too heavy. I was necessary to add approximately weight of 2 kg in the nose.
Last edited by Prekin; 10-29-2014 at 09:25 AM.
#866
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
This is great news VG and I hope for a positive outcome! I heard rumours of Texas which would probably not be doable for me unless it was far west Texas. Colorado on the other hand just might be workable. Heck, I'll probably already be there for WoTR anyway! Of course all of this assumes I can get qualified again. Doh!
#867
My Feedback: (1)
This is great news VG and I hope for a positive outcome! I heard rumours of Texas which would probably not be doable for me unless it was far west Texas. Colorado on the other hand just might be workable. Heck, I'll probably already be there for WoTR anyway! Of course all of this assumes I can get qualified again. Doh!
#868
My Feedback: (2)
Join Date: Jul 2003
Location: Brisbane, QLD, AUSTRALIA
Posts: 2,787
Likes: 0
Received 8 Likes
on
4 Posts
Hey guys,
with a stroke of good luck I scored these molds yesterday....
A turbine flying mate texted me and told me he had bought a few molds of a guy about 5hrs away from here and then offered to either lend or sell me these!
I bought them just in case I damage it.
Trying to get more info on it but about the same size as the CjM one, ( but different wing fillet)
thanks
dave
with a stroke of good luck I scored these molds yesterday....
A turbine flying mate texted me and told me he had bought a few molds of a guy about 5hrs away from here and then offered to either lend or sell me these!
I bought them just in case I damage it.
Trying to get more info on it but about the same size as the CjM one, ( but different wing fillet)
thanks
dave
Last edited by ticketec; 10-30-2014 at 05:59 AM.
#870
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
I was approached by the west coast VP, as we are in a good location. We have a great flying site as well. And yes, getting qualified is the kicker! I plan to go to the AMA Nats again, but honestly, that is a tough qualifier. I may look into an earlier one close by. I just have to find one. I should know within a month or two for sure.
Come on down to Phoenix for the "Gunsmoke" qualifier VG. It is generally a pretty low key event with moderate participation, although we do generally have some of the "heavy hitters" from SoCal to contend with!
#872
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
When is that? I may just have to do it. I had heard there was an event down there, and was going to try to find something fairly close.
Dang, I just have to get this blasted airplane done! I want to have it flying by May, to get any kinks worked out. You know they always do!
Dang, I just have to get this blasted airplane done! I want to have it flying by May, to get any kinks worked out. You know they always do!
May will be too late VG. Not sure that the 2015 dates have been set yet but Gunsmoke is usually the last weekend in February or the first weekend in March. And it generally takes me about two years to get all the kinks worked out of a new scale ship!
#873
My Feedback: (10)
Join Date: Jun 2002
Location: Ladera Ranch, CA
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
I know Chad isn't referring to me when he says "heavy hitters" unless he's referring to my weight and the fact that my landings are typically dramatic with all kinds of parts flying off the plane...