New Hangar 9 30cc Spitfire! Build Thread, i got mine!
#151
Join Date: Sep 2003
Location: Hamilton, Scotland & La Roche Bernard, France
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
BobH, yeah that's the one. I was lucky to pick one up a couple of years ago at a decent price. Last one I saw on Ebay was starting at $155.00 US.
#153
Junior Member
Join Date: Apr 2014
Location: Hampshire, UK
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I am running a HackerA60-14L on 10s in mine, which is 192 kv. I use an APC 20x11E and I get lots of thrust, enough speed for scale but not a rocket ship. So I would guess your AXI would do fine. It's lighter than my Hacker, so you will need lots of weight for the CoG.
#155
My Feedback: (7)
"I am running a HackerA60-14L on 10s in mine, which is 192 kv. I use an APC 20x11E and I get lots of thrust, enough speed for scale but not a rocket ship. So I would guess your AXI would do fine. It's lighter than my Hacker, so you will need lots of weight for the CoG."
I had that exact setup on my ESM FW. We replaced it with a DLE 35RA for gas simplicity but that Hacker is a powerhouse. Anybody else interested in that setup, just give me a shout. I'd sell it for a reasonable amount.
I had that exact setup on my ESM FW. We replaced it with a DLE 35RA for gas simplicity but that Hacker is a powerhouse. Anybody else interested in that setup, just give me a shout. I'd sell it for a reasonable amount.
Last edited by patrnflyr; 09-03-2014 at 10:35 AM.
#156
Member
Join Date: Feb 2009
Location: , UNITED KINGDOM
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Rincewind.
Does anyone use braking from the speed controller on their setup? I guess no brake could be used like an i.c. version but use flaps to slow her down? Can you land this one without flaps?
Does anyone use braking from the speed controller on their setup? I guess no brake could be used like an i.c. version but use flaps to slow her down? Can you land this one without flaps?
#157
My Feedback: (11)
For fixed wing power planes I use NO BRAKE on the ESC, I only use ESC BRAKE ON for powered gliders where a windmilling prop would create undo drag.
Why would you want to land w/o flaps? It lands so well with them.
Most folks that comment on how my Spitfire lands, can't believe it when they pick it up and see how heavy it is. Even forced into a stall up high, it will drop a wing but its not anything violent.
Why would you want to land w/o flaps? It lands so well with them.
Most folks that comment on how my Spitfire lands, can't believe it when they pick it up and see how heavy it is. Even forced into a stall up high, it will drop a wing but its not anything violent.
#158
Junior Member
Join Date: Apr 2014
Location: Hampshire, UK
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
As Barracuda says, I believe a windmilling prop helps to slow a fixed wing plane down, so, no, I don't use a brake on the ESC.
Yes , you can land it without using flaps, but it takes a loooong time to slow down. I much prefer to use flaps when landing. It will fly remarkably slowly for it's weight but that does not mean it lands at walking pace.
Yes , you can land it without using flaps, but it takes a loooong time to slow down. I much prefer to use flaps when landing. It will fly remarkably slowly for it's weight but that does not mean it lands at walking pace.
#159
Junior Member
Join Date: Jun 2008
Location: nijmegen, NETHERLANDS
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
@ Scott Douglas , did jou already fly the spitfire with your laser 180?
Thinking of buying the same combo...
Have already a laser 70 and a laser 100 in my fleet (great engines)!
So i was just wondering
Regards from holland
Thinking of buying the same combo...
Have already a laser 70 and a laser 100 in my fleet (great engines)!
So i was just wondering
Regards from holland
#160
Member
Join Date: Feb 2009
Location: , UNITED KINGDOM
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Barracudahockey and Rincewind,
I asked about the flaps because, although I have flown a number of 3d and aerobatic models( some 160 size) and the odd 40- 50 size semi scale models, I never flown a model with flaps! Thought maybe I could get a feel of the plane first before trying them? The fact that the Axi and speed controller will do, alongside the fact that i have a 10s 45c pack means it is increasingly hard to resist this Spit.
I also have several 10s 25c packs; would these be up to the job do you think?
Many thanks for the replies.
I asked about the flaps because, although I have flown a number of 3d and aerobatic models( some 160 size) and the odd 40- 50 size semi scale models, I never flown a model with flaps! Thought maybe I could get a feel of the plane first before trying them? The fact that the Axi and speed controller will do, alongside the fact that i have a 10s 45c pack means it is increasingly hard to resist this Spit.
I also have several 10s 25c packs; would these be up to the job do you think?
Many thanks for the replies.
#161
My Feedback: (11)
My advice, is take it up high and see how it behaves.
If i were helping you in person I'd set the flaps up on a 3 position switch, dial in the compensation called for in the manual and talk you through an approach and landing using them.
On the beginning of your down wind leg get the gear down and flaps out. Make a gentle descending turn to line up on center line. Be prepared to add a little power to control your descent rate (glide slope) and fly the plane till the mains are on the runway, chop the throttle to idle and dont try to turn till the tail comes down, when it does, get on the up elevator and as soon as you think of it get the flaps up. if you're lucky it won't nose over
This approach minimizes doing any configuration changes on final so you can concentrate on your approach. This thing lands slower than people give it credit for but again, try up high, into the wind with the flaps AND wheels down (full dirty landing configuration) and get a feel for it.
If i were helping you in person I'd set the flaps up on a 3 position switch, dial in the compensation called for in the manual and talk you through an approach and landing using them.
On the beginning of your down wind leg get the gear down and flaps out. Make a gentle descending turn to line up on center line. Be prepared to add a little power to control your descent rate (glide slope) and fly the plane till the mains are on the runway, chop the throttle to idle and dont try to turn till the tail comes down, when it does, get on the up elevator and as soon as you think of it get the flaps up. if you're lucky it won't nose over
This approach minimizes doing any configuration changes on final so you can concentrate on your approach. This thing lands slower than people give it credit for but again, try up high, into the wind with the flaps AND wheels down (full dirty landing configuration) and get a feel for it.
#164
My Feedback: (11)
For the review model we were a little north of 3 pounds to get it to the factory CG with the lead mounted to the top of the motorbox by pouring a slab.
After flying it we cut off lead a little at a time to get to what I felt was a comfortable CG flight wise and it ended up loosing a little over a pound and a half. I dont know where the CG sits now, other than when you roll it over on a 45 degree up line the nose gracefully arches back towards earth and inverted takes some pressure to hold but not half the elevator.
So its still, aerodynamically speaking, just slightly nose heavy, but it flys nicely and lands lightly.
After flying it we cut off lead a little at a time to get to what I felt was a comfortable CG flight wise and it ended up loosing a little over a pound and a half. I dont know where the CG sits now, other than when you roll it over on a 45 degree up line the nose gracefully arches back towards earth and inverted takes some pressure to hold but not half the elevator.
So its still, aerodynamically speaking, just slightly nose heavy, but it flys nicely and lands lightly.
#167
My Feedback: (11)
I did some digging.
The original way we flew it, and the specs for the article were
20 lbs 12 oz, WL 41.04 oz/sq ft WCL 14.4
Hacking the lead off and really having some time to play with it, we are at 18 lbs 14 oz. WL 37.08 oz/sq ft, WCL 13.0
The WCL is probably the most dramatic difference in the way it flys because with the flaps setup right it really floats right on in.
The original way we flew it, and the specs for the article were
20 lbs 12 oz, WL 41.04 oz/sq ft WCL 14.4
Hacking the lead off and really having some time to play with it, we are at 18 lbs 14 oz. WL 37.08 oz/sq ft, WCL 13.0
The WCL is probably the most dramatic difference in the way it flys because with the flaps setup right it really floats right on in.
#168
Senior Member
Join Date: Mar 2009
Location: London, , UNITED KINGDOM
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys have FG30b in mine and I initially balanced at 4 3/4 but I reduced it to 4 1/2 in. Book says 4 1/2---5 in. Took a bit more out and it felt slightly lively on elevator ( not bad) but preferred the 4 1/2 inches. Balanced inverted, UC down, aeroplane level. Hope this helps.
mine flys great just gotta sort cooling out on engine as after 5 mins starts to get a bit hot.
Dave
mine flys great just gotta sort cooling out on engine as after 5 mins starts to get a bit hot.
Dave
#169
Junior Member
Join Date: Jun 2008
Location: nijmegen, NETHERLANDS
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Here is a question for all you petrol pilots,
Im living in holland want to buy the big spitfire and a DLE35 re .
But i certainly have te install a silenced muffler because off the noise only 80 db is allowed.
The question is did other spitfire owners encountered this problem ?
And what was your solution?
Please answer because the buying of the spit depends on it , in holland the rule is no 80 decibell or below, No flying.....
Regards from holland
Scaleflying4life
Im living in holland want to buy the big spitfire and a DLE35 re .
But i certainly have te install a silenced muffler because off the noise only 80 db is allowed.
The question is did other spitfire owners encountered this problem ?
And what was your solution?
Please answer because the buying of the spit depends on it , in holland the rule is no 80 decibell or below, No flying.....
Regards from holland
Scaleflying4life
#171
Junior Member
Join Date: Jun 2008
Location: nijmegen, NETHERLANDS
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Hi barracuda
I fly from soft strip so thats grass.
measurements are 80 db @ 5m distance from airplane.
Is there even any room for a canister?
I did not have seen this plane in real life over here in holland...
Regards from holland
Scale
I fly from soft strip so thats grass.
measurements are 80 db @ 5m distance from airplane.
Is there even any room for a canister?
I did not have seen this plane in real life over here in holland...
Regards from holland
Scale