Shavrov SH-2
#27
#30
Small steps for now, as the weekends are reserved for family life
I've made sides and I've to start Appling the clear coat for the balsa to assure it will not capture any water in it. I have trouble with this on my seamaster. I am not exactly sure what to do with the vottom layer which would be then inaccessible from inside ...
I've made sides and I've to start Appling the clear coat for the balsa to assure it will not capture any water in it. I have trouble with this on my seamaster. I am not exactly sure what to do with the vottom layer which would be then inaccessible from inside ...
#34
meanwhile on our hill
https://www.youtube.com/watch?v=lHgkxbUr_mw&index=31&list=PLkg3v72zblUyEl_NEEUTpWR3EFlw4gVZu and more sanding ...
https://www.youtube.com/watch?v=lHgkxbUr_mw&index=31&list=PLkg3v72zblUyEl_NEEUTpWR3EFlw4gVZu and more sanding ...
#41
the engine seems nice, i could finaly moved on as the servo leads were put in place. now last layer of lacquer and i would be ready to close the boat
Last edited by hipik634; 02-05-2017 at 06:24 AM.
#43
uff I just closed the hull, some more layers of lacquer and i ll move on to cover it. Thats a little problematic - I plan to use transparent lacquer, then use L285 with glass to make the first layer of anti water surface. then I would use foil to wrap it all around. Any comments ?
#45
uff I just closed the hull, some more layers of lacquer and i ll move on to cover it. Thats a little problematic - I plan to use transparent lacquer, then use L285 with glass to make the first layer of anti water surface. then I would use foil to wrap it all around. Any comments ?
That is just me though, your efforts so far are commendable. It looks great.
#49
glassing .. and glassing ....
very confused about strength of epoxy L285 with 50 g/m2 glass cloth - when compared to 33 g/m2 it is really strong, used it for lower parts of the fuse
very confused about strength of epoxy L285 with 50 g/m2 glass cloth - when compared to 33 g/m2 it is really strong, used it for lower parts of the fuse
Last edited by hipik634; 02-16-2017 at 12:46 AM.