Full Build Guide - 250 FPV Racer
03-28-2016, 11:08 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Full Build Guide - 250 FPV Racer
This is my complete FPV racing building guide. I made these videos to make it easier for beginners to easily find all the information. My number one priority is to make it affordable. Post any questions below!
#1 Assembly of the frame, mounting the motors, installing the flight controller and soldering bullet connectors.
https://youtu.be/WZllJ0xpPX8 #2 Installation of the FPV system, soldering the main power leads and binding the transmitter to the receiver.
https://youtu.be/w16vG2DusnM #3 Programming the flight controller (CC3D with OpenPilot).
https://youtu.be/mUMe8CLf3Bc #4 Assembly of the FPV goggles (Quanum V2), and installing the FPV system.
https://youtu.be/81BjBVdH7Us #5 Charging batteries and test fly.
https://youtu.be/0laOuITbDPM All the parts used in my videos will be listed in the description of the video. However, here is the full parts list:
Frame: http://carbix.se/product.html/carbix-...
Flight Controller: http://rctimer.com/product-1285.html
Brushless Motor: http://rctimer.com/product-1128.html
Propellers: http://www.surveilzone.com/Dalprop-2-...
Electric Speed Controller: http://rctimer.com/product-1134.html
Antennas: http://rctimer.com/product-1090.html
Transmitter and Receiver: http://www.hobbyking.com/hobbyking/st...
Turnigy Nano Tech 1300mah 3S 25-50C: http://www.hobbyking.com/hobbyking/st...
FPV goggles: http://www.hobbyking.com/hobbyking/st...
Video transmitter + camera: http://rctimer.com/product-1276.html
Video receiver: http://rctimer.com/product-1129.html
IMAX B3 Charger: http://www.ebay.com/itm/131662747700?...
Heat Shrink Tubing: http://rctimer.com/product-711.html
Heat Shrink Tubing (big): https://www.hobbyking.com/hobbyking/s...
Mounting Pads: http://rctimer.com/product-913.html
LED-strip: http://www.hobbyking.com/hobbyking/st...
22AWG Wire: http://www.hobbyking.com/hobbyking/st...
16AWG Wire: http://www.hobbyking.com/hobbyking/st...
Bullet Connectors: http://rctimer.com/product-335.html
Helping Hands: http://www.hobbyking.com/hobbyking/st...
XT60 Connector: http://www.hobbyking.com/hobbyking/st...
Cable Ties: http://rctimer.com/gallery-141-b,11-0...
1.5mm Hex Screwdriver: http://www.hobbyking.com/hobbyking/st...
Lipo Battery Voltage Tester: http://rctimer.com/product-569.html
#1 Assembly of the frame, mounting the motors, installing the flight controller and soldering bullet connectors.
https://youtu.be/WZllJ0xpPX8 #2 Installation of the FPV system, soldering the main power leads and binding the transmitter to the receiver.
https://youtu.be/w16vG2DusnM #3 Programming the flight controller (CC3D with OpenPilot).
https://youtu.be/mUMe8CLf3Bc #4 Assembly of the FPV goggles (Quanum V2), and installing the FPV system.
https://youtu.be/81BjBVdH7Us #5 Charging batteries and test fly.
https://youtu.be/0laOuITbDPM All the parts used in my videos will be listed in the description of the video. However, here is the full parts list:
Frame: http://carbix.se/product.html/carbix-...
Flight Controller: http://rctimer.com/product-1285.html
Brushless Motor: http://rctimer.com/product-1128.html
Propellers: http://www.surveilzone.com/Dalprop-2-...
Electric Speed Controller: http://rctimer.com/product-1134.html
Antennas: http://rctimer.com/product-1090.html
Transmitter and Receiver: http://www.hobbyking.com/hobbyking/st...
Turnigy Nano Tech 1300mah 3S 25-50C: http://www.hobbyking.com/hobbyking/st...
FPV goggles: http://www.hobbyking.com/hobbyking/st...
Video transmitter + camera: http://rctimer.com/product-1276.html
Video receiver: http://rctimer.com/product-1129.html
IMAX B3 Charger: http://www.ebay.com/itm/131662747700?...
Heat Shrink Tubing: http://rctimer.com/product-711.html
Heat Shrink Tubing (big): https://www.hobbyking.com/hobbyking/s...
Mounting Pads: http://rctimer.com/product-913.html
LED-strip: http://www.hobbyking.com/hobbyking/st...
22AWG Wire: http://www.hobbyking.com/hobbyking/st...
16AWG Wire: http://www.hobbyking.com/hobbyking/st...
Bullet Connectors: http://rctimer.com/product-335.html
Helping Hands: http://www.hobbyking.com/hobbyking/st...
XT60 Connector: http://www.hobbyking.com/hobbyking/st...
Cable Ties: http://rctimer.com/gallery-141-b,11-0...
1.5mm Hex Screwdriver: http://www.hobbyking.com/hobbyking/st...
Lipo Battery Voltage Tester: http://rctimer.com/product-569.html
