Specific Models of Multi-Rotors and Drones This forum is set aside to to talk about the varios brands of commercial equipment on the market today

Full Build Guide - 250 FPV Racer

Old 03-28-2016, 11:08 AM
Junior Member
Thread Starter
RCLifeOn's Avatar
Join Date: Oct 2015
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Full Build Guide - 250 FPV Racer

This is my complete FPV racing building guide. I made these videos to make it easier for beginners to easily find all the information. My number one priority is to make it affordable. Post any questions below!

#1 Assembly of the frame, mounting the motors, installing the flight controller and soldering bullet connectors. #2 Installation of the FPV system, soldering the main power leads and binding the transmitter to the receiver. #3 Programming the flight controller (CC3D with OpenPilot). #4 Assembly of the FPV goggles (Quanum V2), and installing the FPV system. #5 Charging batteries and test fly. All the parts used in my videos will be listed in the description of the video. However, here is the full parts list:

Flight Controller:
Brushless Motor:
Electric Speed Controller:
Transmitter and Receiver:
Turnigy Nano Tech 1300mah 3S 25-50C:
FPV goggles:
Video transmitter + camera:
Video receiver:
IMAX B3 Charger:

Heat Shrink Tubing:
Heat Shrink Tubing (big):
Mounting Pads:
22AWG Wire:
16AWG Wire:
Bullet Connectors:
Helping Hands:
XT60 Connector:
Cable Ties:,11-0...
1.5mm Hex Screwdriver:
Lipo Battery Voltage Tester:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.