specialk1

thats why i put it out there for you all , i hope some on here got it !!! ,

specialk1

hey dont nock the LILL VW , i bet it can pull it to the boat ramp .. [sm=punching.gif] can it get it out hahah[:'(]a well if some one gave me this 50' i would try to push it pull it [&:]

specialk1

well now im looking for a new champ mid and lower . i going to post a stolen add on S&F my mid and two #6 where stolen this week from my freinds shop !! it sucks i think now im going to have to sell my leecraft [&o] if i cant get mine back . i dont know any one that has one ..

specialk1

well if you dont get that one for the same price you can get this http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT

Eddy de Vries

Ken,

It looks like Timmy has a second hand midsection for sale, see [link=http://f2boat.ipublish.no/used-and-new-parts-from-seebold-racing/#more-134192]here[/link].
Maybe he can also help you with some other stuff.

Rgds, Eddy

andybenton

hi all. im looking for an outdrive, not a whole lower drive unit or whole outboard.

like just the drive system, one that bolts to the transom and accepts an inboard nitro motor. its a .18 size nitro and im wanting to put it on a 25inch hull that im trying to make look like a real scale hull.

thanks for any help

specialk1

you are looking for this I/O outdrive . just for now you will have to hunt fleeebay[:@]

joe rocket

hey ken did you outbid me on ebay??

specialk1

thanks Eddy i need a new air system , im going to get that from them .. i found a 12' mid here in Florida and 5 sets of props , i need to rebuild the pump . but i think I'm going to drop down to #4 lowers . I dont think for now im not going to race sst 160 class. but going to do some drag with it . the main reason I'm putting thu Leecraft together was to promote the AMPS boats , i was looking for a seabolt hull but i could not pass up a good deal

specialk1

[X(]yea it was me []

hydrovair

I guess I missed something good???

specialk1

ok all this is the first skeeter bass boat to come out of the mold . well i need to do some more work to the mold , found some imperfections on the top . i want the to come out with out to much sanding . but i will have to say it is not to bad [8D]

specialk1

well this will make you cry [sm=cry_smile.gif] i will say , i have never seen the new one here in the states . they only made 200 of them in 2006 and no more will be made . stiff price for it .. [X(] but neww i think they where 799.00 usd [&o]

specialk1

damm .. [:@] lets see if this works http://cgi.ebay.com/Hirobo-Stern-Dri...item19bb2e6d62

BCHONEA

I had the guy listing these stern drives email me more pictures. I will post for all to drool over. I wish I had the cash to pick it up

BCHONEA

Someone just picked up a Bud Lite Seebold Amps boat for 280 bucks on ebay!  There is a super old outboard on now incase anyone is interested in a beater

andybenton

ok, so can some one tell me what exactly i should search on fleabay?

i like the looks of that outdrive, would that be steel, aluminum or plastic housing on it?

thanks again for all your help guys.

4square

Nice, I've been looking for one of those for over a year!

But I have one question, in the event you decide to actually run the thing on a boat and you chip or break a prop are there replacement props available?

dblthunder

hi this is for andybenton, i have an amps out drive im not sure yet what im going to do with it.it came on a 54 inch.deep v team apache i think it was sold around 84' the alum. housing is in good cond, i repaired lower unit fin that was broken off,now its replaceable, and it will need one gear set i will post pics as soon as this comp illiterate procrastinator figures out how people have been real helpful on this site . i will light a fire and get it done

andybenton

it sounds like it might be a little to big to fit my bill scince you said it came off of a 54 inch boat.

i was actually hoping for something around half that size, but it would be great to see some pictures and be given an idea of its size

BCHONEA

Andy, if you are not interested in the outdrive I might be. You guys let me know what you end up doing. I have an old scale Robbe motor yacht Im building it would go great with.

dblthunder

ok ill get some pics posted. i had injections in my back today and can barely move but will get them posted by sat. for you.

hydrovair

Hey Ken,
That guy should send you a commission check!!!! After you put his aution link on here someone used the buy it now button..

andybenton

like i said before some pics and some size referances will determine will determine if i can use it or not.

as far as that goes, you can take as much time as you need.

after all this is my hobby not my job XD

specialk1

i think the best bet is for your size boat you should try a Graupner Z-Drive ...