stretched mini t yota
#1
Junior Member
Thread Starter
Join Date: Jul 2007
Location: kansas City,
MO
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
stretched mini t yota
Here are some pics of my nearly finished mini t based yota! Custom made one piece alum. chassis with a Delrin pan to accomidate the elecs. Powered by a cobalt brushless motor from the blade (5400 or 5800 kv I think) and 12 1500 mah 2/3A cells and a mamba 25. Body work was done untill the first run..LOL Plan on selling this project once I am done. The body is from an old nikko truck.
ok... once I can post pics I'll get them on here
I can't get pics loaded so here's a link!
http://s172.photobucket.com/albums/w...urks/mini%20t/
ok... once I can post pics I'll get them on here
I can't get pics loaded so here's a link!
http://s172.photobucket.com/albums/w...urks/mini%20t/
#3
Junior Member
Thread Starter
Join Date: Jul 2007
Location: kansas City,
MO
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: stretched mini t yota
I am finishing the body work then it'll look better! Thanks! It cruises about 35-40 mph as it sits...tumbles are hard on that body
#5
Junior Member
Thread Starter
Join Date: Jul 2007
Location: kansas City,
MO
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: stretched mini t yota
ebay...it its off a nikko truck but I can't remember which one. It has huge bumpers,roll bar and a blower sticking out of the hood. [&:]
#8
Junior Member
Thread Starter
Join Date: Jul 2007
Location: kansas City,
MO
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: stretched mini t yota
I used to sell them for the standard wheel base mini t but they never took off. Just used 1/8" alum. flatstock from the home improvement store. Front bulkhead area is the only tricky part.