Which Iron
#1
Member
Thread Starter
Join Date: Apr 2004
Location: Newport, UNITED KINGDOM
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Which Iron
Me thinks this should have gone in the last post but never mind,,, what power soldering iron should i use to solder the cells together to make my own pack?.
Cheers Mark
Cheers Mark
#4
Senior Member
RE: Which Iron
for just wiring (motors/escs) i use a 60watt iron
for batteries i use a 100 watt gun
the thing is with batteries is that u need a iron/gun
that can heat up the surface of the battery fast enough
without overheating the actual cells
also besure to scuff up the cells contacts (a lesson i just learned =P)
for a better bond
and to use flux
anything above 40 should be good if it is a good quality iron
not one of those cheapy ebay china ones but a good radioshack
or weller one
my 100watt gun gets hot very quick in about 9 seconds when i pull the trigger
thing i like about guns is that it only gets hot when u pull the trigger
so when ur not working with the iron right @ the moment, it wont burn anything
for batteries i use a 100 watt gun
the thing is with batteries is that u need a iron/gun
that can heat up the surface of the battery fast enough
without overheating the actual cells
also besure to scuff up the cells contacts (a lesson i just learned =P)
for a better bond
and to use flux
anything above 40 should be good if it is a good quality iron
not one of those cheapy ebay china ones but a good radioshack
or weller one
my 100watt gun gets hot very quick in about 9 seconds when i pull the trigger
thing i like about guns is that it only gets hot when u pull the trigger
so when ur not working with the iron right @ the moment, it wont burn anything
#5
Senior Member
Join Date: Nov 2007
Location: Hillsborough,
CA
Posts: 1,380
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which Iron
Ya. Carpet learned about burns the hard way. And yes, a gun is better. I used to have one, but sold it an with a little more pacients you can oldier just as well with a 45 watt, good quality iron. Oh, and get a soldering jig.