RCU Forums - View Single Post - Skymaster or Fly Eagle

11-25-2010 | 09:58 PM

#39

EagleJC

My Feedback: (2)

Joined: Aug 2009

Posts: 328

Likes: 0

Received 0 Likes on 0 Posts

From: Kensington, MD

RE: Skymaster or Fly Eagle

Hi Jetnuno:Since after Jet Power Fair 2009, company has done a lot of improvement on model quality, such as Epoxy Resin, Glass lay-up, using more carbon fiber for reinforcement, so the current models we produce are strong, but lighter than before. Phote1: Import<place></place><country-region></country-region>Japan fiber glass and Epoxy Resin which are very light, but strong.Phote2: Some carbon formerWe also started producing our own hardware items, such as door cylinders, push rod, etc, especially the cylinders (door or gear cylinder), we do the improvement to stop leaking issue. Photo3 (new style door cylinders)Photo4 (Hardware area)All exhaust pipes are made with 0.2mm diameter on inner pipe and 0.1mm on outer pipe. We also produce electronic valve, such as EV2U, EV5U or EV5UA with good price instead of manual valve. http://www.flyeaglejet.com/en/Electronic.html We still keep listening and improving all the time and try to provide more good models and good prices for all customers. Thanks
James

Reply Like