Good Morning,

This is my first time with LIPOand a charger and Iam having difficulty with my initial charge.

Ihave a 5100 Mah 2s1p7.4v battery as my test subject.

Ihave read the manual and have the charger set to 2.0A2S 7.4

Ihave the battery plugged into the 2S slot on the dongle and the dongle plugged into the right side of the unit.

When Ipress and hold the "start enter"button for 3 seconds it says it is "checking battery"and then beeps and says CONNECTION BREAK.

Any ideas?

Thanks,
Heath</p>