RCU Forums - View Single Post - DIY Vs. Professionally built?
View Single Post
Old 02-12-2011 | 10:30 AM
  #17  
Rob2160's Avatar
Rob2160
Senior Member
 
Joined: Jun 2010
Posts: 4,786
Likes: 0
Received 0 Likes on 0 Posts
From: Sydney, AUSTRALIA
Default RE: DIY Vs. Professionally built?


ORIGINAL: gcopter

I plan to fly mine at a local park. So a 450 is about half the size of a 550? The wind factor rally concerns me. I can fly my 120SR in wind, is just that I'd rather not spend the whole battery over correcting for wind.
<br type="_moz" />
In that case I'd be very wary of getting a larger machine...

I have the 120 SR also... it really can't handle more than about 5-10kts of wind. How much wind do you normally experience?

If you can fly the 120 SR in wind you will EASILY fly a 450 in wind... There is no comparison between the two..

If I can put it in perspective...

the 450 is 5000% more capable in wind that the 120 SR

A 550 might be 20-30% better than the 450 in wind..

Honestly, unless you regularly plan to fly in Gale force windsgreater than 41Kts the 450 will be fine.

I flew mine today in 35 kt gusting winds... no problem at all. The 120SR would have just blown away, even at full forward speed it would have been going backwards..