Hey Rich,
I live across from The Clermont State Historic Site. I have been involved with them for approximately 5 years. I have all kinds of information on the North River of CLERMONT. The model in the display case is 7' long.It was built in 2007 and is now on permanent display at the Historic SiteI'm a personal friend of the builder. I sent him drawings and did some minor consulting with him. The photo of the paddlewheel section of the boat is my 3DSOLID CAD model for a display that is being built by a group of volunteers. There are 4 active members who have donated all of their time and a few $1000 to build an animated display of the engine section. The purpose is to demonstrate how Fulton converted the linear motion of the steam engine to rotary motion at the paddlewheel. We have had a couple of public demos in preparation for May 14th 2011 when we officially turn the display over to New York State. I've attached a few more pix.
If anyone is interested in more info please contact via a personal E-mail.
THX
ORIGINAL: Rich404
Hi guys,</p>
It would be cool if you were to build one of Fulton's boats. Being that he was in NY, there is a really good possibility that you may find information on the Clermont at the Mystic Seaport. See if you can get plans, pics, etc anduse the info toscratch build an RCmodel of it.</p>
Themodel featured in the museum is really nice. Which museum is that? You can also ask them to put you in touch with the builder of that model to see ifthey canhelp you get a set of plans for your project. (It never hurts to ask)
</p>
If you do decide to do it then be sure to set up a build log here.
</p>
-Rich.</p>