RCU Forums - View Single Post - Weatronic question
Thread: Weatronic question
View Single Post
Old 03-23-2011 | 03:49 AM
  #26  
CraigG's Avatar
CraigG
My Feedback: (40)
 
Joined: Jan 2002
Posts: 2,098
Received 36 Likes on 22 Posts
From: Sautee Nacoochee, GA
Default RE: Weatronic question

ORIGINAL: olnico

OK Mark.

Your firmwares are probably not compatible.
You need to update both the transmitter module and receiver module to version 2.33:
http://www.weatronic.com/en/download...-12-22-r-serie
http://www.weatronic.com/en/download...l-24-dual-fhss

Make sure that you format the card correctly before doing the update ( FAT 32, cluster size default ). The card shall be a recent one, max 2 GB, formatted in a good quality reader/writer. The formatting process is essential for the firmware update to occur correctly.

Also read these instructions:
http://www.weatronic.com/en/download...-24-dual-fhss-

P.S: I can see that your receiver is already running on 2.33. So just check the transmitter firmware version on Gigacontrol and update if necessary.
Can you just use the SD cards you already have in the TX and RX and update them?

Obviously you also need to download the 2.33 GigaControl program as well. Does it replace the current version on your computer or show up as separate program?

Too bad there isn't an "Install Wizard" or something more user friendly for us computer challenged, English speaking only people.

Thanks,

Craig
CraigG is offline  
Reply Like