No expert yet but getting there.<div></div><div><div>So my friend tried to assist in my efforts last night at the house and still no luck. </div><div></div><div>I have now hooked up the Spectrum DX6i and BR6000 with the right stick controlling the steering and throttle. The left stick is controlling the turret, main gun and machine gun. Note: We have gone through the setup of the DMD countless times with success.</div><div></div><div>Here are my issues. When throttling in forward or reverse the tank pulls to the left when the trim is set in the middle. We had to adjust the throttle trim all the way to the right to make it drive half decent. It is still pulling to the right. How would I fix this or is this a DX6i issue as I purchased this used on eBay. I rechecked the tention of the track and it all the forward (loose) to see it that would help. The second, is there a way to make the left stick spring loaded for the up and down? Currently the left stick springs back if you go from right to left vice versa but not up and down.</div><div></div><div>Next issue, how to I get the headlights and taillights to come on?</div><div></div><div>Lastly, we could not get the main gun or machine gun to fire on a consistent basis using the flip upward for main gun and flip downward for machine gun despite making the sensitivity as high as we can get it. So, how would I move the main gun and machine gun to the one of many switches on the DX6i? If so which ones and how could I accomplish this as I think I can do this on my own with good instructions.</div><div></div><div>Other non related questions. How can I program the controller to turn the tank on and off via the DX6i?</div><div></div><div>THANKS IN ADVANCE!</div></div>