RCU Forums - View Single Post - Super Skybolt Build
View Single Post
Old 04-16-2011 | 12:42 AM
  #201  
Sabogh's Avatar
Sabogh
 
Joined: Jan 2008
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
From: Herning, DENMARK
Default RE: Super Skybolt Build


ORIGINAL: Zor



Today i made the maiden flight - this is one off the best planes I have, it went off like a dream - it´s a joy to fly this plane.... Yiiihaaaaa
What we have been saying all along.

It is not a kit easy for beginners but a best rewarding aiplane once done and flying.

Enjoy the results of your ''hard labor'' . . .
and congratulations for a nice model.

Zor
You are right...[sm=red_smile.gif] I am glad that i did not put the kit away, but built it instead.
I have just made some changes to the wires holding the wing to the fuse.I did have some trouble getting the wing on when I was at the flying field, it was not easy to guide both wires into the small tubes in the wing at the same time.. I just shortened the rear wire with 2 milimeter, hopefully this will make it easier to slide the wing back in place.