RCU Forums - View Single Post - Wild Hare Electrics
View Single Post
Old 06-07-2011 | 09:21 AM
  #214  
sniperfoote
Junior Member
 
Joined: Jun 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
From: fort smith, NT, CANADA
Default RE: Wild Hare Electrics

hey guys.
I have a question
I bought the 56inch slick and the 540 edge.
I run a four cell power package with hacker pro motor and esc.
the power setup seems fine but i have a problem with the flight characteristics of the slick. I take off and all is good, nice and smooth go to bank her around and she wants to tuck a wing under. full opposite ailerone to correct. Seemed weird so i got some altitude and banked it again this time with more speed. It turned nice and smooth but as i dont fly constantly full throttle i slowed her down to a moderate landing speed banked her over and once again she tucked a wing and scared the pants off me because i was putting in stick inputs but not much was happening. I resigned my plane to the lawn dart gods but as she spun in i started to get control back and managed to save her. Had to land her twice as fast as i should because i was mortified she would tip on the approach.
servoes are within spec for tourque
centre of balance is 1/2 infront of spar seems good
I dont know about these control throws as i fly a lot of 3d and the more throw you can get the better and its never caused these types of stalls ever. In fact my extreme flight edge 540t has a smidge under 90 degrees on the elevater and it harriers awesome. And i usually setup for full throw and if i need less elevator i put less elevator input into the sticks.
Please help ive had two of these for a long time and im to scared to fly them.