Fiery just leveled the air frame put on the wing lots of dyhedral on the wing measured wing tips down to flat surface and off about 1 1/4 inchs
evidently when they jigged the fus they were off added a 1/16 to the top of the fus where wing sits starboard side, wing on again and on the money
with my minnie level wing to fus aft of wing
also the aft end of the fus where it comes together flimsy cut out the end piece and added one twice as long under the stab platform on a good bite for the rudder hinge (Ca insert type) this should be a sweetheart with with the paw 06 going to go with and 8x4 wood zinger as a start, fuel pickup dead level with carb so should be no fuel draw issues. seems this is taking forever to get it right my goldberg tiger 400 with the OSFP 10 davis head no construction issues . should have this one done and flight ready by end of weekend, martin