RCU Forums - View Single Post - Dymond 52" Tiger Moth Build Thread
View Single Post
Old 07-18-2011 | 07:42 PM
  #19  
kerwin50
Senior Member
 
Joined: Oct 2006
Posts: 1,378
Likes: 0
Received 0 Likes on 0 Posts
From: winston, MO
Default RE: Dymond 52

Fred just ask away.
I built my TM back in 2007 also. I have a 45 st in it and it's a great flyer though I crashed it awhile back and have never repaired it though now I may have to start working on her again.
My Decathlage was -1 on the top wing to the bottom.
With the ST 45 I can get this plane to really flatspin.
Ground handling is very sesnitive due to the narrow landing gear.
On take off hold a little elev and slowly advance your throttle while easing off the elev. by the time your at WOT you can pull back on the elev and your flying.
If I remeber correctlyu the CG is at the rear of the cabane.