Ok, here are some details. Some of them are changed but i will write about these.
Front end - first design
This setup is driving but i am not satisfied with it. Suspension is too narow, tower is too weak, bump steer is very high.
Bump steer is very high because my arms forms high angle and turnbuckle joints couldn't performe it. I had to raise turnbuckle joint on one side to lower angle. Result is more than 3mm difference in length when suspension is down.
Those blocks could be better built, but at that time I didn't have a lathe
Anyway, here are photos, maybe someone coul'd learn on my mistakes
