I recently purchased a used DX7 to use for bind-n-fly indoor planes. I have been using a Futaba 7C for the past few years.

My Question is... Is it possible to assign the various switches on a DX7 to different functions. Specifically I would like to assign the Timer to the gear switch on the upper left corner of the radio. On my Futaba 7C I have the ability to assign the switches to the functions I want, but it doesnt appear you can do this on the DX7.

On all of my other planes I have the timer programmed to the left upper most switch (trainer switch on the 7C), and I really dont want to have to re-train myself for a differnet radio if I dont have too.

Thanks