Welcome back to classic pattern and the forum Dan! Very nice kit and you'll enjoy the way she flys. IIRC, Paul C was from Paoli, Indiana, he used to frequent contests in the midwest and was at ours quite a few times (Chicago area). The Dirty Birdy plans call for 3/8" of dihedral at the wing midpoint, setwith the wing upside down. Doesn't sound like much at all, but once you turn the wing over the dihedral is quite evident and looks like much more than 3/8". Your SKynight is a Fliteglas kit from Neoga, IL, most likely done (owned) by Ralph White who still lives in Neoga, IL. Maybe Ralph will see this and pipe in for us. Hope to see your build thread here Dan. Welcome.
Mark