Power System
As yall know I'm working on building my first plane/s And now I'm looking at powering at least one by Lipo. The Trainer 40 will have a Power 32 think thats a 770kv motor. And I'm on 72mHz Have a Old Futaba 8U a JR 6102 and a Old Airtronics system with the analog voltage hand. LOL Any ways I trust all 3. Back in the day when money could be picked off trees I had DX7 & X9303 all that good stuff the best of everything. Now not so fortunate. I was thinking being the electric motor and all will be lighter I could run a ESC with a seprate BEC for my RX and Servos and put them all on a 2S 7.4V 3000+ mah with a regulator down to 6V and Run Dual 11.v 2200mah to power the motor. That would insure if I ran the packs to low, or what ever elseI'd still have some flight controls.</p>