<span style="font-size: smaller">ORIGINAL: mainbeam225 I am trying to program the flaps function into the three position switch in such a way that each position can add a given percentage of flaps. I have tried the land function and the flaperon function but don't much care for the VR 1 operation since the potentiometer starts in the middle and can go either way with no center "feel" when operating by touch/feel. Any help would be greatly appreciated. Thanks, Ron H</span>
Which model Eclipse?, please refer to:
Hitec Eclipse & Eclipse 7 Pro
- All Manuals, Addenda, Quick Setup, CCPM and Additional Programming FAQ
If original Eclipse 7 with rotary pot on top, there were two types.
The later version had an extension and the earlier ones can be drilled and tapped to take
a 4/40 bolt which then acts as a lever and easy to align centre with a small marker.
Alan T.
Alan's Hobby, Model & RC FAQ Web Links