hi
T'day i put in the new FlySky GT2 transmitter/receiever into my nitro truggy..
I have a problem:
After the Tx/Rx were binded and the servo cables were installed into the Rx.
When i pull the trigger to power the throttle..Nothing happens..Acelerate/Brake..
But when i adjust the throttle dial on the Tx..it moves??
I tried another Tx/Rx and it was fine..So the servo is not the problem..
Heres a video if you do not understand
http://s1052.photobucket.com/albums/...t=P1030329.mp4
any ideas?