Max, I just save old two ounce bottles and wash them out in acetone, I have never been brand loyal, I have never seen a nickles worth of difference between glue brands. I buy a bag of tips for the bottles, usually at Hobby Town or Hobby People, then I buy my CA at the Wood Workers Supply Store in 8 ounce bottles and just refill the old glue bottles as needed. I have a bottle of acetone and if a tip cloggs up I just toss it into the acetone and put on a new tip. If I don't feel like changing tips I just clip off about 1/8 inch of the tip to clear it. I'm in the habit of squeezing the bottles sides a little to clear the tip when I'm going to set the bottle down for any length of time. They stay clear that way. I use mostly thin CA so I only buy my thick CA in two ounce bottles.