I am in no way a begginer in rc, however i am a begginer at programming transmitters. on to my issue.....my first plane was an old hangar 9 p 51 pts.....one of the older guys at the field gave it to me with an old airtronics radio system......one day flying at the field with the old 72 mhz radio...a lot of the older guys havent yet converted to 2.4...another guy turned on his transmitter on the same channel...and down she goes...luckily the person that had given me the plane had come down hard on a landing before and wrecked the wing. he ordered a whole new kit to rebuild the wing...also the only thing not damaged on my plane was the wing. so i have the new fuselage and installed all of the electronics....thereare two servos one for each aileron, and one for the flaps. i have the ailerons plugged into my spektrum ar600's aileron port using a y harness. i also have the flap servos pulugged into the gear port. and i have tried it in both the gear and aux port. so i cant get the flaps to work...i am using a dx6i...i have set the travel, and tried a bunch of different mixes and what not that people have suggested through other peoples posts........so is there anyone out there that could help me fix this!!!! its supposed to be 60 and sunny this weekend and id like to bring her out for a flight!!