I am using a JR 12x and Im not terrible but not real good at radio programming. I want to add crow to one of my jets. I would like to either slave the crow to the flaps so when the flaps come down the ailerons go up or possibly to the gear switch so anytime the gear switch is in the gear dn position the ailerons are up in "crow" position. I need help with the different ways of programming this. I have one aileron on channel 2 and one on ch 8. Flaps are plugged into 6 & 7 on the rx.. I tried a program mix and have one aileron going up and one going down when the flaps come down.

Thanks