RCU Forums - View Single Post - BJCraft BISIDE
View Single Post
Old 11-03-2013 | 06:10 PM
  #301  
Doug Cronkhite
My Feedback: (34)
 
Joined: Dec 2001
Posts: 3,821
Likes: 0
Received 11 Likes on 8 Posts
From: San Diego, CA
Default

Put the first flights on my BiSide today and I could not be happier. I had some minor motor/ESC issues, but the airplane is incredible. Took off and I haven't touched the trims. At all. They're all dead center from where I setup the airplane. Now, that's just basic 1G flight trim, and I haven't had time to work on anything yet, but it speaks to how straight the airframe is from BJ.

I tried some pretty basic stuff at relatively low speed and was quite happy with the results. Snaps are CRAZY good, as are pretty much any rolling maneuvers. Others here have said how quickly they felt 'at home' with the airplane, and I have to agree 100%. I felt right at ease with it, and flew a few maneuvers from P15 without issue. Rolling circles are really nice too. My CG needs to move forward a bit (at 135mm right now), but I was mostly just flying these flights to make sure nothing broke, and to break-in my new batteries.

Oh.. RTF is 4780g with Hobby People 4500mah packs, and an 800mah Rx pack.