RCU Forums - View Single Post - nano cpx help
Thread: nano cpx help
View Single Post
Old 02-13-2014 | 09:18 AM
  #4  
flyinwalenda's Avatar
flyinwalenda
My Feedback: (5)
 
Joined: Oct 2009
Posts: 3,975
Likes: 0
Received 1 Like on 1 Post
From: Northeast, PA
Default

I picked up a rtf one on a good deal and I honestly don't know how they expect anyone to fly this on the pre-programmed DX4. I'm no expert but I fly a 450 and 500 and this thing out of the box was like a throwing a cat up in the air!
I set it up on my heli radio (DX7) and also leveled the swash(eyeballed it) and what a difference. I made a tamed-down curve , a normal stunt1 and a stunt 2 idle up. Started out on the tamed-down mode and quickly advanced to the normal mode.
It is a nimble thing and quite darty . As mentioned it is also very durable.

I would set up a tamed down throttle/pitch/curve and try that. Also check and adjust the swashplate.

Last edited by flyinwalenda; 02-13-2014 at 09:21 AM.