DaleCS,

I have a Byron P-40 with the Predision Eagle 4.3, Purr Pow'r & 3 blade sysem that I am finishing up. Everyone that I have talked to about this setup states that the P-40 will fly very scale-like with the 3 blade prop but the performance will be increased if a 2 blade sysem is used. Since I do not want to take a chance on breaking the 3 blade on test flights, I am going to get a 2 blade adapter and use wood props until I get used to flying the P-40. If these adapters are not available from Iron Bay, I have a fellow club member that is a machinist.

Did the latex paint work out pretty good? Since I do not have any experience with latex, I am looking for any tips & pointers...

Smooth Landings,
Jake