Well maidened my Mini Pulse "XT" today,and gotta say it is probably the best flying model I have right now.The little OS 10 pulled it around quite well.Only took a few clicks of up trim.It does everything it's big brother does and just as well too.Mine came out at 26.4 oz ready to fly,about 2 oz heavier than the e-powered version.I flew it as an e-powered model for about two years,and I can say it flys the same with either power source.It flys for about eight minutes on 3 oz of fuel with enough reserve for a couple of go arounds.All I did to convert it was cut about a half inch off the motor mount and lay in a piece of quarter inch plywood and some fiberglass cloth and epoxy for added strength,also fuel proofed the whole front section of the model with some Brodak airplane dope.Thats it.Now on to my next project converting a Leader 480 to glow.

Later Jim