RCU Forums - View Single Post - Anybody using HD servo's ?
View Single Post
Old 03-25-2015, 04:50 PM
  #2  
ahicks
My Feedback: (2)
 
Join Date: Aug 2008
Location: Waterford, Mi/Citrus Springs, Fl
Posts: 3,821
Received 19 Likes on 17 Posts
Default

I generally don't enter in to these servo brand/model strings as they often end up, well, with many opinions and no definitive results. So I'll say simply I wouldn't be scared to try your servos in a sport plane I didn't have a fortune tied up in. If their centering isn't the absolute best available, so what? Most flyers I fly with will never notice or be able to detect that fact.

IMHO, many guys spend a LOT of money on servos that will perform at a level so far beyond their capabilities it seems a waste. There are many very inexpensive servos out there with good reputations. Here's 2 of them I've been flying for quite a while and would trust in anything short of a full on contest plane.

http://www.troybuiltmodels.com/items/HD-1501MG.html
http://www.hobbyking.com/hobbyking/s...arehouse_.html