Originally Posted by
t6racer
Hi David & George they look great the props they are throwing are excellent I have Wren turbo props they will throw those blades but won't get the RPM.
I will be looking very closely to see if you have any problems with them KingTech are an excellent turbine there after sales service over here is excellent.
Hey t6racer,
I ran my K-60tp spinning the Fiala 24x17 three-blade prop yesterday. At roughly 75% throttle (147000 rpms shown on the ecu data terminal), the prop was spinning at roughly 5100 rpms. Though the max rpms for the Kingtech K-60tp is 160000, I think I will need to set the max rpms for the engine at 147000 to keep the prop at roughly 5000 rpms on the ground. This seems to be a powerful little engine and should spin a 24x20 three-blade prop easily. Looking forward to seeing how well and how fast it will fly my plane.